SHOWER UPGRADE 101 - TOP TIPS FOR NEW UNIT INSTALLATION

Shower Upgrade 101 - Top Tips For New Unit Installation

Shower Upgrade 101 - Top Tips For New Unit Installation

Blog Article

Get A Free Quote



Are you currently searching for help concerning How to Install a Direct-to-Stud Shower Enclosure?


How to Install a Direct-to-Stud Shower Enclosure
A successful shower installation needs cautious planning and a lot of work. Most of the times, you will certainly need to do three types of tasks: framing walls, setting up the plumbing, as well as ending up wall surfaces.

Prep work


First of all, you need to pick the kind of shower that you desire to mount. It is necessary to identify whether the selected shower is capable of dealing with specific systems as well as can regulate a safe level of water with the central heating boiler. The majority of shower devices nowadays are designed to be flexible to different water stress (such as saved hot water as well as chilly keys).
It is additionally crucial to think about the water stress and the planning of the piping and also water drainage for the shower

Different Types of Shower Units


  • Push-on Mixer: The pipe and also spray parts of the push-on mixer shower unit can be linked to the bathroom faucet as per your requirement, as well as the water temperature level can be readjusted via the taps. Push-on mixers are cheap and also extremely easy to set up. Nevertheless, although the pipe link is straightforward, it is conveniently removed. In addition, it is bothersome to adjust the temperature.

  • Bath/Shower Mixer: The hose pipe as well as spray of this kind of shower are integrated with a bathroom mixer faucet, and also the temperature can be readjusted with the bath faucets. It is a very low-cost choice as well as no additional plumbing is included. However, the bath/shower mixers also suffer from inconvenient temperature control choices.

  • Manual Mixer: The hose pipe as well as spray of a hand-operated mixer shower system are a part of the wall unit and the hot and cold water products are linked to a solitary valve The temperature and also stress of the water are managed via either one or a selection of knobs (in much more expensive showers). Although temperature level control is much easier in manual mixer types, they are more pricey than the formerly discussed mixers. They also call for additional plumbing of hot and cold water system pipes.

  • Thermostatic Mixer: The tube and spray of this shower kind are a part of the wall surface unit and also the hot and cold water products are connected to a single shutoff right here as well. It is total with a built-in stabiliser to self-adjust the water temperature level as well as to prevent it from ending up being as well hot. One of the biggest benefits of a thermostatic mixer shower type consists of convenient temperature level control. However, it is one of the most expensive of the various mixer choices.

  • Power Shower: A power shower is a solitary system having a powerful electrical pump that is capable of modifying both the water pressure as well as temperature level. This type of shower can be fitted if there is water from a cold water cistern as well as a hot water cylinder. A power shower makes the change of both pressure and temperature easy. On the other hand, it disagrees for water heated straight by the shower or where the water is supplied by a mix central heating boiler under mains pressure.

  • Electric Shower: An electrical shower is plumbed into a keys cold water supply as well as it warms the water electrically. It is essential to keep in mind that for this shower type to be mounted, the mains stress needs to be at the very least 0.7 kg/sq cm (10lb/sq in). The device allows the temperature as well as stress to be changed using a knob. Designs with temperature stabilisers are much better as they continue to be unaffected by various other taps somewhere else in operation within the household. A significant drawback of electric showers is that the control handle only enables the alternative of high temperatures at much less stress, or lower temperature levels at a better pressure. This is troublesome in the winter when the spray is frequently weak as well as the keys water is colder. Nevertheless, this trouble is tackled in some designs which are offered with a winter/summer setup.


  • Method


    Depending upon the sort of shower you wish to mount, the shower head have to either be fitted in order to prevent its contact with the water in the bath listed below or the base tray, or it has to have a check valve.
    Prior to beginning, it is recommended to note the placements of the shower head and control, as well as to intend the pipe-work involved. Furthermore, the drainage system to remove the waste water will require to be planned. Both settings of the cable path and also the shower switch will certainly also need to be taken into consideration if an instant or electrical shower device is being set up.
    Make use of the instruction guide given with the shower system to fit the shower control.Before suitable the pipes that will provide the water to the shower system, it is very important to remove the supply of water. In order to protect the pipes, they ought to be given a water resistant covering as well as also fitted with separating valves. The pipelines can then be buried right into the wall and also plastered over to neaten the general appearance.
    Fit the base tray, shower head, and also fittings.
    Link the major shower control to the pipes that will be providing the water (This might call for a women screw thread adapter).
    Reconnect the supply of water and also test the pipes for any type of leakages, as some may need tightening up.
    If you are mounting an electric shower, bear in mind to switch off the electrical power supply prior to making any kind of electric links. As soon as these connections have actually been made (there must be guidance within the instruction manual), the power supply can be changed back on.

    Readjusting Water Stress to Match Your Shower


    The cold water reservoir can be lifted to a higher elevation (occasionally as little as 150mm (6inches)) by fitting a strong wooden support underneath it - perhaps made up of struts and also blockboards. If you choose this option, the major and distribution pipes will also have to be raised to satisfy the new height of the reservoir.
    Additionally, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever type is selected, it must be connected into the power supply in order to run.

    Piping and also Water drainage


    It is best to make use of 15mm size supply pipelines, as well as make the runs to the shower as short and straight as possible so as to maintain maximum stress and also reduce warmth loss. In addition, by reducing using arm joints for pipe corners, you can lower the resistance in the circulation of the water system. You can attain this by flexing the pipelines rather.

    The Majority Of Usual Blunders


  • Going against or overlooking neighborhood code constraints.

  • Making use of pipelines that are also tiny.

  • Affixing copper to galvanized without making use of a brass or dielectric suitable in between both.

  • Not utilizing tape or pipe compound at threaded joints.

  • Not leveling your fixtures when installing them.

  • Not installing an air void filling up for fixtures.

  • Cutting supply stub outs too short to install the shutoff valves onto after the ended up wall surface remains in location.

  • Not correctly aligning tubes into fittings or stop shutoffs. (Requiring the nut onto the compression ring at an angle when the tubes goes to an angle will trigger a leak.).

  • When turning the water back on in your home, always run the outside pipe shutoff or purge your bathrooms to hemorrhage dirt as well as air from the lines. This debris can cause problems in your sink faucets and various other plumbing trim.



  • The best type of shower enclosure


    South India Agency (SIA), is a leading, fast-growing company that homes the best bathroom and hardware accessories of quality products, with an established and well-networked channel partners combined to provide unmatched service both for residential and commercial requirements, from wardrobe fittings and accessories to furniture accessories. SIA is known for innovative products from reputed Firms.



    When it is about your new bathroom fitting or upgrading one in the existing premises, think only to install the best accessories and fittings. Daily, you are going to use it to freshen up your day. It is something you’re going to use every day for the next couple of years. A place to rejuvenate yourself in the mornings and allow you to unfold after a long tiresome day. From wash basin to the minutest detail fittings for your bathroom needs like Tooth Brush Holders, Shelves, Soap Dishes, Baskets, Dispensers, Tumblers, Bathroom Ceiling Lights & Wall Lights, Exhaust Fans, toilet paper holders, etc are available here.



    Are you confused?



    You can visit SIA, take their opinion, and see the multiple solutions. A diverse range of best bathroom fittings is available.



    If you are looking for Shower enclosures, the right choice could be made from different types of shower enclosures like large showers to hinged shower enclosures depending on what suits your budget and the bathroom size. If the bathroom is spacious enough, then large and walk-in showers are preferred. On the contrary, smaller sizes of bathrooms can use quadrant corner shower enclosures, 3 Sided shower enclosures, Bifold shower enclosures or hinged shower enclosures, etc, which can be used based on the availability of space. SIA is well-known for its quality shower products, made with premium materials, ideal for creating high-quality bathrooms at an affordable price.



    Bathroom shower cubicles are made of thick glasses that are sturdy and leak-proof. They also are easy to maintain, strong, and heat resilient; making them equally safe for kids and adults. The cubicles are kept in place using chrome-plated brass fixtures, which are rust-free and elegant. Other materials that are used include plastic and thin waterproof materials for the shower screen.



    As cited here, there are different ranges of bathroom accessories in SIA and hence space in the bathroom is to be considered before purchasing any shower cubicles. Ideally, the shower enclosure could be near the bathtub, considering constraints of space. It can be in line with your bathroom style and other accessories. Sliding doors, when used in shower enclosures, are best suited for a rectangular bathroom where the allotted space is less. Sliding doors offer a comfortable bath without having to be concerned about the water splashing or spilling outside the enclosure.



    Choosing the right shower cubicle as per your budget and matching your bathroom needs are of prime importance. At South India Agencies we have a wide range of bathroom fittings and accessories. Finding the right shower cubicle that fits your budget should not be a problem. Shower cubicles from South India Agencies are pioneered with precision and can be tailor-made so that your bathroom space and size requirements are met. A shower cubicle enhances the look and feels of the bathroom and blends into the color scheme. Our display center in Bangalore is a one-stop shop for all your bathroom fittings and accessories.



    South India Agencies (SIA) is a Display Centre with a wide range of architectural and builders’ hardware associated with 80+ powerful brands, for all your requirements under one roof.

    https://southindiaagencies.com/blog/best-type-of-shower-enclosure/


    How to Install a Freestanding Shower Unit

    I hope you enjoyed our section about How to Install a Freestand. Thank you so much for spending some time to read our piece of content. Appreciated our blog entry? Please share it. Help another person locate it. Many thanks for your time spent reading it.




    Here


    Report this page